Do you need a way to block your vehicle in case of theft? Frotcom’s Immobilizer allows you to block your vehicle in case of theft.
For each vehicle, you will be given a unique code that will allow you to block and unblock thesystem. Use it either through Frotcom’s web interface or through Frotcom’s smartphone app.
For security reasons, vehicle immobilization will only take place once the vehicle is parked and the ignition turned off. When that occurs, immobilization will take place immediately.
From that moment on, trying to turn the engine on again will have no effect. Until you reactivate the vehicle by entering the unblocking code, the ignition will not work.
Add the “GPS Controlled” sticker to your vehicle, to discourage thieves. This is probably as important as the installation of the immobilizer itself.
When you or another authorized person issues the immobilization command, the switch is opened. This then cuts off the electric circuit to the starter. As a consequence, if the driver tries to turn the key to restart the engine, nothing will happen.
Once an “antidote” command is sent to the device, the switch will close again, allowing the current from the car battery to reach the starter. When the driver turns the key again, the engine will start.
For security reasons, the immobilizer does not have any impact on a vehicle while it is running. The only effect will be to disable the driver’s capacity to restart the engine, once the ignition is turned OFF.
● Unique code for each vehicle
● Does not interfere with driving (not dangerous)
● Simple installation